Showing all 8 results

  • UNICONNECT+

    UniCONNECT+ is a Programming and Diagnostic Interface which gives users the freedom to reflash their Engine Control Unit (ECU) or Transmission Control Unit (TCU) from the comfort of their own garage. With the ability to upgrade the Unitronic Performance Software, flash back to stock, and also perform diagnostics, UniCONNECT+ is a complete end-user programming and diagnostic interface that provides control over your vehicle.

    Availability
    UniCONNECT+ is available for purchase through our Authorized Dealer Network and directly from Unitronic. UniCONNECT+ is compatible with most of 2006 and up vehicles.*

    Simple Installation
    UniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort of your own home or garage.*

    Unitronic recommends the use of these battery chargers to ensure, uninterrupted, trouble-free, flashing at home!

    OptiMate 7 SELECT
    OptiMate 6 SELECT

    Change Software Maps
    Quickly and Easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suite the hardware and fuel modifications or fuel grade used.

    Data Logging
    Gathering high resolution data is made easy with Unitronic’s pre-configured channel loadouts for fast and effortless troubleshooting and data logging.**

    Simple back to factory restoration
    UniCONNECT+ makes it painless to revert your ECU back to it’s stock calibration within minutes.*

    Advanced Settings
    Enable optional advanced settings such as Launch Control or No Lift Shifting within minutes. Enable Gear display in MFG for DSG Software owners.*

  • UNITRONIC CARBON FIBER AIR DUCT FOR 1.8/2.0 TSI GEN3 MQB

    With extensive background in engineering the finest in Performance Software, Unitronic developed an air duct that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines and Unitronic’s Carbon Fiber Cold Air Intake System.

    This translates into an Air Duct that provides increased power and air flow by taking advantage of both air inlets available in the OEM grill.

    To learn more about the performance benefits of our Carbon Fiber Air Duct Click Here.

    Features / Benefits

    Optimized Design for Maximum Performance:
    Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.
    Dual Air Inlet:
    Take advantage of both air inlets available in the OEM grille and benefit from an increased air flow.
    2/2 Twill Prepreg Carbon Fiber Weave:
    High quality material to give you a lightweight, durable and resistant airbox.
    Oversized Airbox Air Inlet for Increased Airflow:
    Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.
    Autoclave Construction:
    The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component.
    Quality Silicone Components:
    Heavy duty, heat resistant and durable 4-ply silicone hose will not crack or tear overtime.
    Coolant Reroute Silicone Hose:
    Get this silicone hose out of the way to enjoy the looks of your Unitronic Carbon Fiber components.
    Direct Bolt-On Fitment with OEM Mounting Locations:
    Utilizes all OEM mounting locations.

    Hardware Included
    Carbon Fiber Air Duct
    Coolant Reroute Silicone Hose
    Hardware Kit

  • UNITRONIC CARBON FIBER COLD AIR INTAKE FOR 1.8/2.0 TSI GEN3 MQB

    With extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.

    This translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.

    In addition, Unitronic’s Cold Air Intake will enhance the sound of your turbocharger and diverter valve.

    Features / Benefits

    Optimized Design for Maximum Performance:
    Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.
    2/2 Twill Prepreg Carbon Fiber Weave:
    High quality material to give you a lightweight, durable and resistant airbox.
    Stainless Steel Hardware:
    Rust resistant hardware that will outlast your vehicle.
    Quality Silicone Components:
    Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration.
    Autoclave Construction:
    The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish.
    Oversized Airbox Air Inlet for Increased Airflow:
    Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.
    Enhanced Turbocharger Sound:
    Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).
    Airbox Water Drainage Provision:
    Open slots located at the bottom of airbox allow for the drainage of water.
    Proprietary 3-inch Filter:
    Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.
    Smooth Flow Transition:
    Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements.
    Direct Bolt-On Fitment with OEM Mounting Locations:
    Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.

    Hardware Included
    3-inch Powdercoated Aluminum Inner Intake Tube
    Multi-ply Turbo Inlet Tube
    Carbon Fiber Box
    Proprietary 3-inch Dry-Filter (Cotton)
    Hardware Kit

  • UNITRONIC CARBON FIBER COLD AIR INTAKE FOR TIGUAN MK2 GEN3B

    With extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance on the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine.

    This translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.

    In addition, Unitronic’s Cold Air Intake will enhance the sound of your turbocharger and diverter valve.

    Click here for more information

    Features / Benefits

    Optimized Design for Maximum Performance:
    Unitronic specifically developed its air intake system to provide increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.
    2/2 Twill Prepreg Carbon Fiber Weave:
    High quality material to give you a lightweight, durable and resistant airbox.
    Stainless Steel Hardware:
    Rust resistant hardware that will outlast your vehicle.
    Quality Silicone Components:
    Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration.
    Autoclave Construction:
    The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.
    Oversized Airbox Air Inlet for Increased Airflow:
    Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.
    Enhanced Turbocharger Sound:
    Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).
    Airbox Water Drainage Provision:
    Open slots located at the bottom of airbox allow for the drainage of water.
    Proprietary 3-inch Filter:
    Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.
    Smooth Flow Transition:
    Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements.
    Direct Bolt-On Fitment with OEM Mounting Locations:
    Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.

    Hardware Included
    3-inch Powdercoated Aluminum Inner Intake Tube
    Multi-ply Turbo Inlet Tube
    Carbon Fiber Box
    Proprietary 3-inch Dry-Filter (Cotton)
    Hardware Kit

  • UNITRONIC CARBON FIBER INTAKE SYSTEM WITH AIR DUCT FOR 1.8/2.0 TSI GEN3 MQB

    With extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.

    This translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. Unitronic’s Carbon Fiber Air Duct also helps to increase power and air flow by taking advantage of both air inlets available in the OEM grill.

    In addition, Unitronic’s Cold Air Intake will enhance the sound of your turbocharger and diverter valve.

    To learn more about the performance benefits of our Carbon Fiber Air Duct Click Here.

    Features / Benefits

    Optimized Design for Maximum Performance:
    Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.
    Quality Silicone Components:
    Heavy duty, heat resistant and durable 4-ply silicone hose will not crack or tear overtime.
    Stainless Steel Hardware:
    Rust resistant hardware that will outlast your vehicle.
    2/2 Twill Prepreg Carbon Fiber Weave:
    High quality material to give you a lightweight, durable and resistant airbox.
    Autoclave Construction:
    The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.
    Proprietary 3-inch Filter:
    Unitronic’s proprietary 3″ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.
    Oversized Airbox Air Inlet for Increased Airflow:
    Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.
    Smooth Flow Transition:
    Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements.
    Direct Bolt-On Fitment with OEM Mounting Locations:
    Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.
    Enhanced Turbocharger Sound:
    Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).
    Dual Air Inlet:
    Take advantage of both air inlets available in the OEM grille and benefit from an increased air flow.
    Airbox Water Drainage Provision:
    Open slots located at the bottom of airbox allow for the drainage of water.

    Hardware Included
    Carbon Fiber Box
    Carbon Fiber Air Duct
    Coolant Reroute Silicone Hose
    3-inch Powdercoated Aluminum Inner Intake Tube
    Multi-ply Turbo Inlet Tube
    Proprietary 3-inch Dry-Filter (Cotton)
    Hardware Kit

  • UNITRONIC INTAKE ADAPTER FOR MY19+ 2.5 TFSI EVO

    Hardware Included
    1 x Intake Adapter for MY19+ 2.5 TFSI EVO
    1 x Silicone hose
    2 x Silicone hose clamps
    2 x Silicone rings

    Related Hardware

    Unitronic 3 inch Intake System for 2.5TFSI EVO
    Unitronic 4 inch Intake System for 2.5TFSI EVO

  • UNITRONIC INTAKE SYSTEM FOR B9 2.0 TSI MLB EA888

    Unitronic’s all-new Carbon Fiber Intake System for the B9 2.0 TSI MLB EA888 engines, found in the B9 Audi A4 and Audi A5, helps free up the intake restrictions of the OEM unit. It is engineered for seamless integration within the engine bay and improves the performance, look and sound of your vehicle.

    Built with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.

    Read the full release article here.

    Features / Benefits
    2/2 Twill prepreg carbon fiber weave
    Autoclave construction
    EPDM couplers
    High-quality stainless steel hose clamps
    Proven power, torque, and airflow gains
    Smooth airflow transitions
    Direct bolt-on fitment with OEM Mounting Locations & EPDM mounting grommets

    Hardware Included
    Unitronic Carbon Fiber Airbox
    Carbon Fiber Air Duct
    Carbon Fiber Transition Tube
    EPDM Flex Coupler
    6″ Tapered Cone Air Filter
    90° Barbed Tube
    All Necessary Hardware Included

    Related Hardware

    Unitronic 6 inch Tapered Cone Air Filter for B9 3.0TFSI EA839
    Unitronic Intake System for B9 Audi S4 and S5 3.0TFSI EA839

  • UNITRONIC INTAKE SYSTEM FOR B9 AUDI S4 AND S5 3.0TFSI EA839

    Unitronic’s all-new Carbon Fiber Intake System for the B9 3.0TFSI EA839 engines, found in the B9 Audi S4 and Audi S5, helps free up the intake restrictions of the OEM unit. It is engineered for seamless integration within the engine bay and improves the performance, look and sound of your vehicle.

    Built with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.

    Read the full release article here.

    Features / Benefits
    2/2 Twill prepreg carbon fiber weave
    Autoclave construction
    EPDM couplers
    High-quality stainless steel hose clamps
    Direct bolt-on fitment with OEM Mounting Locations & EPDM mounting grommets
    Smooth airflow transitions
    Proven power, torque, and airflow gains

    Hardware Included
    Unitronic Carbon Fiber Airbox
    Carbon Fiber Air Duct
    Carbon Fiber Transition Tube
    EPDM Flex Coupler
    6″ Tapered Cone Air Filter
    All Necessary Hardware Included

    Related Hardware

    Unitronic 6 inch Tapered Cone Air Filter for B9 3.0TFSI EA839